略過巡覽連結
ALL-200 Universal Device Programmer
A new generation compact size high performance device programmer
Introduction

ALL-200 Universal Device Programmer is designed to provide high quality yet compact size programming platform for IC programming at development / engineering stage.

ALL-200 extremely high freq. core circuit design significantly cut down programming time of high density memory products.

ALL-200 has 56 sets of Precise Universal Pin Driver to provide high speed, low noise, accurate and reliable programming signals for various IC products including high speed low power devices recently released to market.

ALL-200 works with dedicated Socket Board (HD-xxx-xxx) per IC package type. This eliminates the requirement of additional socket adaptor / converter which might impact programming yield due to poor contact and/or signal noise.

The supporting software is updated weekly on HI-LO web site for checking / retrieving through Internet. Programming of new products will not be neglected after purchasing.

Features & Benefits
  • Excellent performance
  • ALL-200 extremely high freq. core circuit design significantly cut down programming time of high density memory products. Precise Universal Pin Drivers provide high speed, low noise, accurate and reliable programming signals for various IC products including high speed low power devices recently released to market.
  • Wide range of IC coverage
  • ALL-200 supports wide range of IC products including EPROM, EEPROM, Serial EE, SPI memory, FLASH, MPU/MCU product types and DIP, SDIP, SOP, SSOP, TSOP, PLCC, QFP, QFN, SON, BGA package types.
  • Easy to setup & operate
  • ALL-200 setup and operation can be done easily by connecting Device Programmer to PC with Windows 2000/XP/Server 2003/Vista/Windows7/Windows 8 O.S. through USB port, load data file or read Master IC, then select functional options (Program、Verify、Auto…etc.) to start programming.
  • Direct-mount Socket Board
  • ALL-200 works with dedicated Socket Board (HD-xxx-xxx) per IC package type. This eliminates the requirement of additional socket adaptor / converter which might impact programming yield due to poor contact and/or signal noise.
  • High expansion flexibility
  • From development / engineering stage using ALL-200 single-site programming through limited production stage using ALL-200G multi-site programming to mass production stage using AT3-300 series automated programming, high expansion flexibility of programming platform is well prepared.
  • Timely software support
  • The supporting software is updated weekly on HI-LO web site for checking / retrieving through Internet. Programming of new products will not be neglected after purchasing.
  • World wide service
  • Distribution channel covers 35 countries worldwide, all inquiries / problems can be served easily and timely.
TOP

Specification
  • Core controller
  • 16 bits high freq. core control circuit with high performance FPGA & CPLD
 
  • Key functions
  • Load File, Read Master, Program, Verify, Auto, ID Check, Checksum, Blank Check, Erase, Secure, Protect / Unprotect, Edit, Function Configuration, Self Test.
 
  • Support devices
  • IC types : EPROM, EEPROM, Serial EE, SPI memory, FLASH, MPU/MCU…etc.
  •  
  • IC packages : DIP, SDIP, SOP, SSOP, TSOP, PLCC, QFP, QFN, SON, BGA…etc.
  •  
  • IC leads : 8 pins ~ 300 pins
 
  • Device contact
  • Dedicated Socket Board ( HD-xxx-xxx ) per IC package type
 
  • I/O channels
  • 56 sets Precise Universal Pin Drive
  •  
  • Provide high quality programming signals for high speed low power (1.8V) devices
 
  • Data transfer interface
  • Transfer port : USB x 1
  •  
  • Transfer speed : USB1.1 : 12 Mb/sec. USB2.0 : 480 Mb/sec.
 
  • Host computer requirement
  • An Intel or compatible processor with 512MB of RAM
  •  
  • At least one USB port is available
  •  
  • 50MB free hard disk space
  •  
  • Windows 2000 / XP / Server 2003 / Vista/ Windows 7/ Windows 8 or later rev. operation system
  •  
  • CD ROM / DVD ROM Drive
 
  • Power
  • Power source : AC 100 V ~ 240 V 50 Hz ~ 60 Hz
  • Power consumption : 50 W
 
  • Operation temperature
  • 0 ℃ ~ 40 ℃ (32 ℉~ 105 ℉)
 
  • Dimension
  • W x D x H 130mm x 170mm x 40mm
 
  • Weight
  • ~ 0.82 kg (Base Unit) ~ 0.86 kg (with socket board on top)
 
  • Certification
  • CE certified
TOP

Ordering Information
  • Standard accessories︰
  • Include ALL-200 Base Unit, USB cable, driver S/W and user manual in CD-ROM
  • Optional accessories︰
  • HD-xxx-xxx : Dedicated Socket Board per IC package type
  • Contact HI-LO sales or check web site http://www.hilosystems.com
  • for appropriate P/N for IC package to be programmed
TOP

TOP